Flat Wire Guide Rod
Use the Full Length Flat Wire Guide Rod to improve cycling and overall operation. Flat wire springs last longer than conventional round wire springs and function reliably with a wider range of ammunition power factors.
The guide rod is precision machined and, used with a spring plug, replaces your stock recoil spring guide rod and plug. No modifications necessary on full size 1911/2011 pistols. Works on bushing barrels and bull barrels
Assembly and disassembly are the same as with stock components but a bushing wrench may be required. Alternatively, the entire recoil system may be disassembled using a takedown tool or bent paper clip. The hardened stainless steel rod has a hole for simple pin-style take down.
Dual takedown holes pre-drilled. Use as is for Government (5″) pistols. Cut to length for use in Commander and Officer sized pistols, including Limited and Open pistols.
- Improves Cycling and Overall Operation
- Improved Recoil Spring Life
- No binding
- Full Length Recoil Spring Guide Machined from Bar stock
- .250″ Rod Diameter
*For use with flat wire recoil springs only-not appropriate for standard round wire springs.
CAUTION: Wear safety glasses at all times when replacing or working with firearm springs. Failure to follow this safety precaution could result in bodily injury.